DENE B Classic S
1 syringe / 10ml
1 syringe / 10ml
*CE approved Mark on BOX Without Lidocaine
HA Filler for Body
HA Filler for Body
Ingredients : HA 20mg/ml
Composition : Cross-linked hyaluronic acid
Injection Site : Subcutaneous or Intradermal injection
Syringe Volume : 10mL
Application Area : Breasts and buttocks augmentation
Maintenance Period : 12-24 Months
Composition : Cross-linked hyaluronic acid
Injection Site : Subcutaneous or Intradermal injection
Syringe Volume : 10mL
Application Area : Breasts and buttocks augmentation
Maintenance Period : 12-24 Months
DENE B Classic S
1 syringe / 10ml
*CE approved Mark on BOX Without Lidocaine
1 syringe / 10ml
*CE approved Mark on BOX Without Lidocaine
What is DENE B Classic S Body Filler?
DENE B Classic S body filler is an innovative body filler, its MDM (MBMT + DMCT + MDAP) patented technology comprises three advantages such as MBMT (Micro Bead Monophasic Technology), DMCT (Divinyl sulfone Multi-Crosslink Technology), and MDAP (Multiple Degree Amphiphilic Purification) which assure the effectiveness of the product. More specifically, micro-particles of DENE B Classic S body filler shows high cohesiveness and provides safety and long-lasting effect without altering their chemical properties.
The HA (sodium hyaluronate, active ingredient) of DENE B Classic S body filler is glucosamine consisting of disaccharide units of D-glucuronic acid and N-acetyl-D-glucosamine. The material of the filler is not derived from animal sources, and thus poses little risk of allergic reactions or disease transfer.
DENE B Classic S body filler is an innovative body filler, its MDM (MBMT + DMCT + MDAP) patented technology comprises three advantages such as MBMT (Micro Bead Monophasic Technology), DMCT (Divinyl sulfone Multi-Crosslink Technology), and MDAP (Multiple Degree Amphiphilic Purification) which assure the effectiveness of the product. More specifically, micro-particles of DENE B Classic S body filler shows high cohesiveness and provides safety and long-lasting effect without altering their chemical properties.
The HA (sodium hyaluronate, active ingredient) of DENE B Classic S body filler is glucosamine consisting of disaccharide units of D-glucuronic acid and N-acetyl-D-glucosamine. The material of the filler is not derived from animal sources, and thus poses little risk of allergic reactions or disease transfer.
Characteristics of DENE B Classic S Body Filler
Dene B Classic S (Soft) Body filler guarantees a more toned and well-contoured body, assuring a plumper and more defined breast structure. In other areas, DENE B Classic S body filler works on the size of the buttocks and adds volume to the hip area. Overall, DENE B Classic S body filler moisturizes and fixes dry and scabby skin. DENE B Classic S body filler has an average duration of 12-24 months,
Dene B Classic S (Soft) Body filler guarantees a more toned and well-contoured body, assuring a plumper and more defined breast structure. In other areas, DENE B Classic S body filler works on the size of the buttocks and adds volume to the hip area. Overall, DENE B Classic S body filler moisturizes and fixes dry and scabby skin. DENE B Classic S body filler has an average duration of 12-24 months,
Dene B Classic-S is a soft type, while Dene B Classic-H is a hard type sodium hyaluronate (HA) gel. The procedure may cause middle or absent bruising. Both are recommended to be used for breast and buttock augmentation. Effects last approximately 1 year, though longevity depends on the patient’s skin type and other external factors.
How to use DENE B Classic S Body Filler
General Instructions for Filler Injection Procedure
In the beginning, it is important to examine the area in which to proceed with the treatment from the back and sides to determine the specific injection area. This must be done while the patient is standing, as lying down augments the natural gravity and shape. Before disinfecting, it is useful to mark the specific areas.
The procedure can be performed under local anesthesia and lidocaine injection Usually, for the purpose of volumizing, the filler is injected into the upper gluteal region, which lifts up the gluteal area and the sub-gluteal crease. In case the lateral area lacks volume, the filler could be injected to enhance the dips. For this procedure specifically, it is often used the fanning injection technique.
Experts recommend an injection of 30-40 cc of hyaluronic acid gel for each buttock and no more than 100cc per session, especially if it is the patient’s first time. After the treatment, the doctor should evaluate the product distribution and gently massage it from bottom to top if necessary.
Aftercare
Disinfectant should be applied to the injected points after the procedure. In order to facilitate the product's integration with the dermis, the area must be taped in a triangle shape and the patients are to keep it on for at least three days and avoid getting it wet. Immediately after the treatment, patients may experience slight swelling.
Common Filler Injection Techniques
1. Bolus technique
After passing the needle through the skin to a deeper structure, we inject the product with the needle remaining as still as possible.
2. Serial puncture
It is usually performed very superficially in the intradermal depth. It involves multiple small boluses in a crease or static line. The amount of HA injected is minimal, typically 0.01 to 0.02 ml.
3. Linear threading
In order to enter the skin, the needle is kept parallel to the surface. Backward withdrawal of the needle injects the product. This is called a retrograde linear thread. It is possible to inject the product before the needle in some cases. This can be useful because it can push blood vessels out of the way. In this scenario, we call it an anterograde linear thread, and you can see the product is injected ahead of the advancing needle.
4. Fanning
This technique spreads the product over a wider area. After the needle has passed under the skin, the product is laid down in a linear thread as the needle is withdrawn. However, instead of removing the needle completely, it is necessary to change the angle of the needle and then place another linear thread of product back at the entrance. It is possible to repeat these threads in a radial pattern.
5. Cross hatching
In cross-hatching technique, the procedure starts by injecting a series of linear threads in a parallel orientation. Then it is necessary to change the angle of the needle to 90 degrees from the original, then inject another series of linear threads, which are all perpendicular to the first row.
Why is DENE B Classic S Body Filler recommended?
DENE B Classic S Body Fille is recommended to clients who want to augment their breasts and buttocks without the use of implants, autologous fat injections, and surgical procedures. The procedure is safe and minimally invasive because it uses non-animal-derived hyaluronic acid, which is biocompatible with the human body. Not only that, the DENE B Classic S Body Fille is of very high quality because they are manufactured using patented MCL technology, which maximized the viscosity of the cross-linked HA by applying a 3 staged micro-bead process. Moreover, DENE B Classic S Body Fille has been tested and proven to have a higher viscosity, elasticity, and outstanding shape retention compared to competitors on the market.
General Instructions for Filler Injection Procedure
In the beginning, it is important to examine the area in which to proceed with the treatment from the back and sides to determine the specific injection area. This must be done while the patient is standing, as lying down augments the natural gravity and shape. Before disinfecting, it is useful to mark the specific areas.
The procedure can be performed under local anesthesia and lidocaine injection Usually, for the purpose of volumizing, the filler is injected into the upper gluteal region, which lifts up the gluteal area and the sub-gluteal crease. In case the lateral area lacks volume, the filler could be injected to enhance the dips. For this procedure specifically, it is often used the fanning injection technique.
Experts recommend an injection of 30-40 cc of hyaluronic acid gel for each buttock and no more than 100cc per session, especially if it is the patient’s first time. After the treatment, the doctor should evaluate the product distribution and gently massage it from bottom to top if necessary.
Aftercare
Disinfectant should be applied to the injected points after the procedure. In order to facilitate the product's integration with the dermis, the area must be taped in a triangle shape and the patients are to keep it on for at least three days and avoid getting it wet. Immediately after the treatment, patients may experience slight swelling.
Common Filler Injection Techniques
1. Bolus technique
After passing the needle through the skin to a deeper structure, we inject the product with the needle remaining as still as possible.
2. Serial puncture
It is usually performed very superficially in the intradermal depth. It involves multiple small boluses in a crease or static line. The amount of HA injected is minimal, typically 0.01 to 0.02 ml.
3. Linear threading
In order to enter the skin, the needle is kept parallel to the surface. Backward withdrawal of the needle injects the product. This is called a retrograde linear thread. It is possible to inject the product before the needle in some cases. This can be useful because it can push blood vessels out of the way. In this scenario, we call it an anterograde linear thread, and you can see the product is injected ahead of the advancing needle.
4. Fanning
This technique spreads the product over a wider area. After the needle has passed under the skin, the product is laid down in a linear thread as the needle is withdrawn. However, instead of removing the needle completely, it is necessary to change the angle of the needle and then place another linear thread of product back at the entrance. It is possible to repeat these threads in a radial pattern.
5. Cross hatching
In cross-hatching technique, the procedure starts by injecting a series of linear threads in a parallel orientation. Then it is necessary to change the angle of the needle to 90 degrees from the original, then inject another series of linear threads, which are all perpendicular to the first row.
Why is DENE B Classic S Body Filler recommended?
DENE B Classic S Body Fille is recommended to clients who want to augment their breasts and buttocks without the use of implants, autologous fat injections, and surgical procedures. The procedure is safe and minimally invasive because it uses non-animal-derived hyaluronic acid, which is biocompatible with the human body. Not only that, the DENE B Classic S Body Fille is of very high quality because they are manufactured using patented MCL technology, which maximized the viscosity of the cross-linked HA by applying a 3 staged micro-bead process. Moreover, DENE B Classic S Body Fille has been tested and proven to have a higher viscosity, elasticity, and outstanding shape retention compared to competitors on the market.
※ Caution
We, Medi-Fella Korea, do NOT take any responsibility for medical issues and problems that occur during cosmetic procedures.